Absolute Accuracy's Basic Custom Rifle $2285
Remington 700 Stainless Steel Action
Re-cutting the receiver threads and lugs true to the bolt
Squaring the front of the receiver to the threads and lugs
The bolt face and lugs are re-cut and hand lapped
The barrel is stainless steel, match grade, contour of your choice
The barrel is chambered to minimum specifications and fit to the action with minimum headspace
The new barrel incorporates a recessed target crown
An oversized recoil lug is installed between the barrel and the action
The stock is a Bell and Carlson Medalist composite stock with the integral aluminum bedding block (other stocks are available)
The trigger is adjusted to a crisp 2.5 pounds
The rifle is bedded in the stock with Marine-Tex Epoxy
The action and barrel are bead blasted to a matte finish
The rifle can be ordered with any caliber between .224 and .338.
Other calibers are available at additional cost.
Rifle Accuracy Job $495
This is a special package deal to introduce new customers to our work. Although this is not a complete custom rifle, you will be pleased with the increase in accuracy of your rifle. You supply us with your Remington 700 rifle and we will perform the work listed below.
•
Square the front of the receiver
Square the front of the receiver•Re-cut the bolt face, nose, and lugs
Re-cut the bolt face, nose, and lugs•Surface grind the recoil lug flat and parallel
Surface grind the recoil lug flat and parallel•Set barrel back and re-cut the chamber true to the axis of the barrel
Set barrel back and re-cut the chamber true to the axis of the barrel•Re-crown the muzzle
Re-crown the muzzle•Bed the action to the stock with Marine-Tex epoxy
Bed the action to the stock with Marine-Tex epoxy•Adjust the trigger
Adjust the triggerAbsolute Accuracy LLC
812 N Kurzweil Rd
Raymore, MO 64083
816-520-1814
ray@lawlergear.com
Custom Rifles
